BBVLK - AMERCOAT, 68A CURE, ZINC CHROMATE PRIMER

  • MSDS: BBVLK
  • Manufacturer: AMERON PROTECTIVE COATINGS DIV
  • Product Name: AMERCOAT, 68A CURE, ZINC CHROMATE PRIMER
  • National Stock Number: 8010-00F006325
Product Identification

Product ID:AMERCOAT, 68A CURE, ZINC CHROMATE PRIMER
MSDS Date:01/01/1987
FSC:8010
NIIN:00F006325
MSDS Number: BBVLK

Responsible Party
AMERON PROTECTIVE COATINGS DIVISION/BREA, CA 92621

Emergency Phone: (714) 529-1951

Cage: 0Y2E4

Contractor
AMERON PROTECTIVE COATINGS
1020 BREA, CA 92622-1020 US

Telephone: 714-529-1951

Cage: 0Y2E4

Ingredients

NAPHTHALENE (SARA III)

CAS: 91-20-3

RTECS: QJ0525000

Fraction By Weight: 39%

OSHA PEL 10 PPM/15 STEL

ACGIH TLV: 10 PPM/15 STEL; 9192

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS


POLYAMIDE RESIN

Fraction By Weight: 32%


XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 18%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


METHYL N-AMYL KETONE

CAS: 110-43-0

RTECS: MJ5075000

Fraction By Weight: 18%

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM; 9192


N-BUTYL ALCOHOL (SARA III)

CAS: 71-36-3

RTECS: EO1400000

Fraction By Weight: 1 - 5%

OSHA PEL 100 PPM

ACGIH TLV: S, C 50 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Hazards

Effects of Overexposure:IRRITATING TO SKIN/MUCOUS
MEMBRANES/EYES/RESPIRATORY SYSTEM/HEADACHE/NAUSEA/KIDNEY & LIVER
DAMAGE.

First Aid

First Aid:INHALATION: PROVIDE FRESH AIR. SKIN: RINSE W/5% ACETIC ACID,
THEN WASH THOROUGHLY W/SOAP & WATER. EYES: FLUSH W/WATER FOR AT
LEAST 15 MINS/GET MED ATT. LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. INGE STION: DON'T INDUCE VOMITING. CALL PHYSICIAN.

Fire Fighting

Flash Point:95F (SETA)
Lower Limits:0.9%
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:ISOLATE FROM HEAT, ELECTRICAL EQUIPMENT,
SPARKS AND OPEN FLAME.

Accidental Release

Spill Release Procedures:ELIMINATE ALL SOURCES OF IGNITION. USE
ABSORBENT CLEANUP MATERIALS.

Handling

Handling and Storage Precautions:KEEP CONTAINER CLOSED. STORE IN COOL,
WELL VENTILATED AREA. IN CONFINED AREAS/TANKS/STAGNANT A
CONDITIONS, USE EXPLOSION/SPARK-PROOF EQUIPMENT.
Other Precautions:AVOID PROLONGED BREATHING OF VAPORS OR SPRAY MIST OR
CONTACT WITH SKIN & EYES. DESTROY ALL LEATHER MATERIAL WHICH CANNOT
BE CONTAMINATED.

Exposure Controls

Respiratory Protection:NIOSH APPROVED RESPIRATOR. IN CONFINED AREAS,
USE AIRLINE HOOD RESP.
Ventilation:PROVIDE LOCAL EXHAUST VENTILATION TO KEEP Protective Gloves:NEOPRENE
Eye Protection:GOGGLES/FACE SHIELD
Other Protective Equipment:FULL PROTECTIVE CLOTHING/SHOE
COVERINGS/SPARK-PROOF EQUIP.
Supplemental Safety and Health
MSDS DATE: 06/15/85. WT PER GAL: 7.4 LBS.

Chemical Properties

Boiling Pt:B.P. Text:300-425F
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:69%

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, EPOXY RESIN UNDER UNCONTROLLED CONDITIONS.
Stability Condition to Avoid:HEAT, OPEN FLAME, ARC OR SPARKS.
Hazardous Decomposition Products:CO, CO2 & NOX

Disposal

Waste Disposal Methods:IN SEPARATE CLOSED METAL CONTAINER IN ACCORDANCE
WITH ALL APPLICABLE REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.